to top
Android APIs
public class

AudioRecord

extends Object
java.lang.Object
   ↳ android.media.AudioRecord

Class Overview

The AudioRecord class manages the audio resources for Java applications to record audio from the audio input hardware of the platform. This is achieved by "pulling" (reading) the data from the AudioRecord object. The application is responsible for polling the AudioRecord object in time using one of the following three methods: read(byte[], int, int), read(short[], int, int) or read(ByteBuffer, int). The choice of which method to use will be based on the audio data storage format that is the most convenient for the user of AudioRecord.

Upon creation, an AudioRecord object initializes its associated audio buffer that it will fill with the new audio data. The size of this buffer, specified during the construction, determines how long an AudioRecord can record before "over-running" data that has not been read yet. Data should be read from the audio hardware in chunks of sizes inferior to the total recording buffer size.

Summary

Nested Classes
interface AudioRecord.OnRecordPositionUpdateListener Interface definition for a callback to be invoked when an AudioRecord has reached a notification marker set by setNotificationMarkerPosition(int) or for periodic updates on the progress of the record head, as set by setPositionNotificationPeriod(int)
Constants
int ERROR Denotes a generic operation failure.
int ERROR_BAD_VALUE Denotes a failure due to the use of an invalid value.
int ERROR_INVALID_OPERATION Denotes a failure due to the improper use of a method.
int RECORDSTATE_RECORDING indicates AudioRecord recording state is recording
int RECORDSTATE_STOPPED indicates AudioRecord recording state is not recording
int STATE_INITIALIZED indicates AudioRecord state is ready to be used
int STATE_UNINITIALIZED indicates AudioRecord state is not successfully initialized.
int SUCCESS Denotes a successful operation.
Public Constructors
AudioRecord(int audioSource, int sampleRateInHz, int channelConfig, int audioFormat, int bufferSizeInBytes)
Class constructor.
Public Methods
int getAudioFormat()
Returns the configured audio data format.
int getAudioSessionId()
Returns the audio session ID.
int getAudioSource()
Returns the audio recording source.
int getChannelConfiguration()
Returns the configured channel configuration.
int getChannelCount()
Returns the configured number of channels.
static int getMinBufferSize(int sampleRateInHz, int channelConfig, int audioFormat)
Returns the minimum buffer size required for the successful creation of an AudioRecord object, in byte units.
int getNotificationMarkerPosition()
Returns the notification marker position expressed in frames.
int getPositionNotificationPeriod()
Returns the notification update period expressed in frames.
int getRecordingState()
Returns the recording state of the AudioRecord instance.
int getSampleRate()
Returns the configured audio data sample rate in Hz
int getState()
Returns the state of the AudioRecord instance.
int read(short[] audioData, int offsetInShorts, int sizeInShorts)
Reads audio data from the audio hardware for recording into a buffer.
int read(byte[] audioData, int offsetInBytes, int sizeInBytes)
Reads audio data from the audio hardware for recording into a buffer.
int read(ByteBuffer audioBuffer, int sizeInBytes)
Reads audio data from the audio hardware for recording into a direct buffer.
void release()
Releases the native AudioRecord resources.
int setNotificationMarkerPosition(int markerInFrames)
int setPositionNotificationPeriod(int periodInFrames)
void setRecordPositionUpdateListener(AudioRecord.OnRecordPositionUpdateListener listener, Handler handler)
Sets the listener the AudioRecord notifies when a previously set marker is reached or for each periodic record head position update.
void setRecordPositionUpdateListener(AudioRecord.OnRecordPositionUpdateListener listener)
Sets the listener the AudioRecord notifies when a previously set marker is reached or for each periodic record head position update.
void startRecording()
Starts recording from the AudioRecord instance.
void startRecording(MediaSyncEvent syncEvent)
Starts recording from the AudioRecord instance when the specified synchronization event occurs on the specified audio session.
void stop()
Stops recording.
Protected Methods
void finalize()
Invoked when the garbage collector has detected that this instance is no longer reachable.
[Expand]
Inherited Methods
From class java.lang.Object

Constants

public static final int ERROR

Added in API level 3

Denotes a generic operation failure.

Constant Value: -1 (0xffffffff)

public static final int ERROR_BAD_VALUE

Added in API level 3

Denotes a failure due to the use of an invalid value.

Constant Value: -2 (0xfffffffe)

public static final int ERROR_INVALID_OPERATION

Added in API level 3

Denotes a failure due to the improper use of a method.

Constant Value: -3 (0xfffffffd)

public static final int RECORDSTATE_RECORDING

Added in API level 3

indicates AudioRecord recording state is recording

Constant Value: 3 (0x00000003)

public static final int RECORDSTATE_STOPPED

Added in API level 3

indicates AudioRecord recording state is not recording

Constant Value: 1 (0x00000001)

public static final int STATE_INITIALIZED

Added in API level 3

indicates AudioRecord state is ready to be used

Constant Value: 1 (0x00000001)

public static final int STATE_UNINITIALIZED

Added in API level 3

indicates AudioRecord state is not successfully initialized.

Constant Value: 0 (0x00000000)

public static final int SUCCESS

Added in API level 3

Denotes a successful operation.

Constant Value: 0 (0x00000000)

Public Constructors

public AudioRecord (int audioSource, int sampleRateInHz, int channelConfig, int audioFormat, int bufferSizeInBytes)

Added in API level 3

Class constructor.

Parameters
audioSource the recording source. See MediaRecorder.AudioSource for recording source definitions.
sampleRateInHz the sample rate expressed in Hertz. 44100Hz is currently the only rate that is guaranteed to work on all devices, but other rates such as 22050, 16000, and 11025 may work on some devices.
channelConfig describes the configuration of the audio channels. See CHANNEL_IN_MONO and CHANNEL_IN_STEREO. CHANNEL_IN_MONO is guaranteed to work on all devices.
audioFormat the format in which the audio data is represented. See ENCODING_PCM_16BIT and ENCODING_PCM_8BIT
bufferSizeInBytes the total size (in bytes) of the buffer where audio data is written to during the recording. New audio data can be read from this buffer in smaller chunks than this size. See getMinBufferSize(int, int, int) to determine the minimum required buffer size for the successful creation of an AudioRecord instance. Using values smaller than getMinBufferSize() will result in an initialization failure.

Public Methods

public int getAudioFormat ()

Added in API level 3

Returns the configured audio data format. See ENCODING_PCM_16BIT and ENCODING_PCM_8BIT.

public int getAudioSessionId ()

Added in API level 16

Returns the audio session ID.

Returns
  • the ID of the audio session this AudioRecord belongs to.

public int getAudioSource ()

Added in API level 3

Returns the audio recording source.

public int getChannelConfiguration ()

Added in API level 3

Returns the configured channel configuration. See CHANNEL_IN_MONO and CHANNEL_IN_STEREO.

public int getChannelCount ()

Added in API level 3

Returns the configured number of channels.

public static int getMinBufferSize (int sampleRateInHz, int channelConfig, int audioFormat)

Added in API level 3

Returns the minimum buffer size required for the successful creation of an AudioRecord object, in byte units. Note that this size doesn't guarantee a smooth recording under load, and higher values should be chosen according to the expected frequency at which the AudioRecord instance will be polled for new data. See AudioRecord(int, int, int, int, int) for more information on valid configuration values.

Parameters
sampleRateInHz the sample rate expressed in Hertz.
channelConfig describes the configuration of the audio channels. See CHANNEL_IN_MONO and CHANNEL_IN_STEREO
audioFormat the format in which the audio data is represented. See ENCODING_PCM_16BIT.
Returns
  • ERROR_BAD_VALUE if the recording parameters are not supported by the hardware, or an invalid parameter was passed, or ERROR if the implementation was unable to query the hardware for its input properties, or the minimum buffer size expressed in bytes.

public int getNotificationMarkerPosition ()

Added in API level 3

Returns the notification marker position expressed in frames.

public int getPositionNotificationPeriod ()

Added in API level 3

Returns the notification update period expressed in frames.

public int getRecordingState ()

Added in API level 3

Returns the recording state of the AudioRecord instance.

public int getSampleRate ()

Added in API level 3

Returns the configured audio data sample rate in Hz

public int getState ()

Added in API level 3

Returns the state of the AudioRecord instance. This is useful after the AudioRecord instance has been created to check if it was initialized properly. This ensures that the appropriate hardware resources have been acquired.

public int read (short[] audioData, int offsetInShorts, int sizeInShorts)

Added in API level 3

Reads audio data from the audio hardware for recording into a buffer.

Parameters
audioData the array to which the recorded audio data is written.
offsetInShorts index in audioData from which the data is written expressed in shorts.
sizeInShorts the number of requested shorts.
Returns
  • the number of shorts that were read or or ERROR_INVALID_OPERATION if the object wasn't properly initialized, or ERROR_BAD_VALUE if the parameters don't resolve to valid data and indexes. The number of shorts will not exceed sizeInShorts.

public int read (byte[] audioData, int offsetInBytes, int sizeInBytes)

Added in API level 3

Reads audio data from the audio hardware for recording into a buffer.

Parameters
audioData the array to which the recorded audio data is written.
offsetInBytes index in audioData from which the data is written expressed in bytes.
sizeInBytes the number of requested bytes.
Returns
  • the number of bytes that were read or or ERROR_INVALID_OPERATION if the object wasn't properly initialized, or ERROR_BAD_VALUE if the parameters don't resolve to valid data and indexes. The number of bytes will not exceed sizeInBytes.

public int read (ByteBuffer audioBuffer, int sizeInBytes)

Added in API level 3

Reads audio data from the audio hardware for recording into a direct buffer. If this buffer is not a direct buffer, this method will always return 0. Note that the value returned by position() on this buffer is unchanged after a call to this method.

Parameters
audioBuffer the direct buffer to which the recorded audio data is written.
sizeInBytes the number of requested bytes.
Returns
  • the number of bytes that were read or or ERROR_INVALID_OPERATION if the object wasn't properly initialized, or ERROR_BAD_VALUE if the parameters don't resolve to valid data and indexes. The number of bytes will not exceed sizeInBytes.

public void release ()

Added in API level 3

Releases the native AudioRecord resources. The object can no longer be used and the reference should be set to null after a call to release()

public int setNotificationMarkerPosition (int markerInFrames)

Added in API level 3
Parameters
markerInFrames marker position expressed in frames
Returns

public int setPositionNotificationPeriod (int periodInFrames)

Added in API level 3

Sets the period at which the listener is called, if set with setRecordPositionUpdateListener(OnRecordPositionUpdateListener) or setRecordPositionUpdateListener(OnRecordPositionUpdateListener, Handler). It is possible for notifications to be lost if the period is too small.

Parameters
periodInFrames update period expressed in frames
Returns

public void setRecordPositionUpdateListener (AudioRecord.OnRecordPositionUpdateListener listener, Handler handler)

Added in API level 3

Sets the listener the AudioRecord notifies when a previously set marker is reached or for each periodic record head position update. Use this method to receive AudioRecord events in the Handler associated with another thread than the one in which you created the AudioTrack instance.

Parameters
handler the Handler that will receive the event notification messages.

public void setRecordPositionUpdateListener (AudioRecord.OnRecordPositionUpdateListener listener)

Added in API level 3

Sets the listener the AudioRecord notifies when a previously set marker is reached or for each periodic record head position update.

public void startRecording ()

Added in API level 3

Starts recording from the AudioRecord instance.

public void startRecording (MediaSyncEvent syncEvent)

Added in API level 16

Starts recording from the AudioRecord instance when the specified synchronization event occurs on the specified audio session.

Parameters
syncEvent event that triggers the capture.
Throws
IllegalStateException
IllegalStateException
See Also

public void stop ()

Added in API level 3

Stops recording.

Protected Methods

protected void finalize ()

Added in API level 3

Invoked when the garbage collector has detected that this instance is no longer reachable. The default implementation does nothing, but this method can be overridden to free resources.

Note that objects that override finalize are significantly more expensive than objects that don't. Finalizers may be run a long time after the object is no longer reachable, depending on memory pressure, so it's a bad idea to rely on them for cleanup. Note also that finalizers are run on a single VM-wide finalizer thread, so doing blocking work in a finalizer is a bad idea. A finalizer is usually only necessary for a class that has a native peer and needs to call a native method to destroy that peer. Even then, it's better to provide an explicit close method (and implement Closeable), and insist that callers manually dispose of instances. This works well for something like files, but less well for something like a BigInteger where typical calling code would have to deal with lots of temporaries. Unfortunately, code that creates lots of temporaries is the worst kind of code from the point of view of the single finalizer thread.

If you must use finalizers, consider at least providing your own ReferenceQueue and having your own thread process that queue.

Unlike constructors, finalizers are not automatically chained. You are responsible for calling super.finalize() yourself.

Uncaught exceptions thrown by finalizers are ignored and do not terminate the finalizer thread. See Effective Java Item 7, "Avoid finalizers" for more.